Vennligst vent...

Produktet ble lagt i handlekurven.Se handlevognen her
Handlekurven din er tom.
Tom handlevogn
Forsiden > D-LINK USB 2.0 ETH 10/100MBPS

Vennligst vent...

USB 2.0 ETH 10/ 100MBPS
SKU: DUB-E100
D-Link DUB E100 - Nettverksadapter - Hi-Speed USB - EN, Fast EN - 10Base-T, 100Base-TX - 100 Mbps
Grensesnitt: USB
Hastighet: 100Mbps
Media: Copper
Porter: 1
Ikke på lager ETA ETA ETA Må bestilles, antatt Ingen produkter på lager til spesialpris. Antatt leveringsdato er 26.09.2017
Antall:

279,-
 
Beskrivelse

D-Link Hi-Speed USB 2.0 10/100Mbps Fast Ethernet Adapter


The D-Link DUB-E100 is a Hi-Speed USB 2.0 10/100Mbps Fast Ethernet Adapter specifically designed to plug into an available Universal Serial Bus (USB) port on a desktop or laptop PC running Microsoft Windows XP, Me, 2000 or 98. Based on USB 2.0, the DUB-E100 extends the transfer speed of earlier USB Fast Ethernet adapters to true 10/100Mbps connectivity.

As a USB device, the D-Link DUB-E100 eliminates the need to use an ISA, PCI, or PC Card slot to add LAN connectivity to a PC desktop or laptop computer. Installation and use are further simplified by living up to USB's out-of-the-box installation approach to connecting computer peripherals. You will not need to open the case of your computer, nor will you be required to set IRQ's. The D-Link DUB-E100 represents the simplest way to connect your computer to an Ethernet based network.

The D-Link DUB-E100 provides a standard RJ-45 connector for a quick and simple method of connecting to an Ethernet 10Mbps or Fast Ethernet 100Mbps based LAN via a network hub or switch. The single type "B" USB port enables it to be connected directly to a USB host computer, or a USB Hub.

Power for the DUB-E100 is provided directly by the USB bus eliminating the need for an external power adapter. It also supports USB's energy saving suspend and resume functions to minimize power consumption, which is especially useful for laptop/notebook users.

Specifications
  General
  • USB Specification Version 2.0
  • USB Specification Version 1.1
  • USB Specification Version 1.0
  • OHCI (Open Host Controller Interface)
  • EHCI (Enhanced Host Controller Interface)
  • IEEE 802.3 Ethernet
  • IEEE 802.3u 100 BASE-T, TX and T4 compatible
  • Supports suspended mode and remote wakeup
  • Embedded 7K * 16 bit SRAM Buffer
  • Supports full and half duplex in Fast Ethernet
  Compatible Operating Systems
 USB 2.0 Speed
  • Microsoft Windows XP, ME, 2000, 98 with USB 2.0 Support

  USB 1.x Speed

  • Microsoft Windows XP, ME, 2000, 98 with USB 1.x Support
  Ports
  • One upstream USB Type "B" receptacle
  • One RJ-45 (10/100Mbps Dual-Speed)
  Wiring Topology       Tiered Star
  Connectivity       Up to 127 devices by cascading multiple hubs
  Diagnostic LED's
  • Power/Link
  • Tx/Rx traffic
  Operating Temperature
      0°C to 70°C
  Storage Temperature
      0 to 95%, no-condensing
  Humidity       5% to 95%, non-condensing
  Power Requirements       Bus Powered - 2.5 W, 0.5 A @ 3.3 VDC (+ or - .3 VDC )
  Power Consumption       150 mA @ 3.3 VDC
  Compliance
  • CE
  • FCC Class B
  • VCCI
  • UL

Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.