Handlekurven din er tom.
Tom handlevogn
Forsiden > AV UTSTYR > LERRET > 16:9 Widescreen > Tab-Tension > DreamScreen V6 Tab 120" / 265cm 16:9 BrightWhite white cassette

Vennligst vent...

Produktet er ikke lenger i vårt sortiment. Ta kontakt om du trenger hjelp til å finne et erstatningsprodukt.
DreamScreen V6 Tab 120" / 265cm 16:9 BrightWhite white cassette (628-0-120)
SKU: 628-0-120
Kundeerfaringer
03.08.2018 20.12
Ordered the version with a black cassette, received the white. The information on how to adjust the height was incorrect as a new motor had been put in the version I got, took some time to get the correct information. The IR receiver also didn't work so the remote control didn't work, new board was needed. The screen becomes creased when it roles up, these disappear after the screen is down for a few weeks, they come back after each time you retract it back in and takes weeks for them to disappear, defeating the purpose of it rolling up. These creases are visible as brighter and darker bands on the screen. On my screen there is also a spot with a slightly different brightness to the left center. My first projector screen, had it for around 8 months, not really happy with it. Maybe I am expecting too much.
Beskrivelse

NB! Alle Tab V6 har fått ny, oppdatert motor med endret justeringsoppsett av drop. For å justere drop, dvs. når lerretet skal stoppe automatisk når du trykker NED knappen på remoten, skal du nå bruke den lilla justeringsskruen og ikke den hvite skruen som sitter under plastlokket som tidligere. Kjør først lerretet helt ned og start deretter justeringen ihht retningsindikatorene på den gule lappen. Juster VELDIG forsiktig til å begynne med for å forsikre deg om at riktig skrue bruke, og kjør lerretet opp og ned for å sjekke før du starter å justere litt mer. Hvis du ser bevegelse på øvre stoppunkt i stedet må videre justering avsluttes og du må justere deg tilbake til start og ringe oss (eller sende oss en e-post) for videre assistanse. Vi gjør oppmerksom på at justering av drop skjer på egen risiko, ved skade på lerretet som følge av feil justering får vi ikke dekket dette fra produsenten. 


Informasjon fra produsent:



USER MANUAL >>

The tab tension mechanism provides you with the most even surface available on a cassette based screen solution. The Tab V6 also features a vast selection of integrated control options such as a cordless 12V trigger and RS232, a brand new 6. generation reference quality D65 tuned screen fabric in either grey or white as well as an updated, sleek cassette design available in both black and white.

 

The V6 featues a new contemporarily designed square cassette


Control capabilities

Our new V6 Tab includes a huge amount of control options. First, the basic IR remote control is included. IR also allows you to use Logitech Harmony or any other universal remote systems to create a macro that - for example - moves the screen down when the projector is turned on and back up when the projector is turned off. Furthermore, a regular manual wall box is included.

For more advanced setups, a 12V cordless trigger is included. Providing that your projector or AV-receiver has a 12V trigger output, you can use this trigger functionality to automatically pull the screen down and up, for example when the projector is turned on and off. For even more integrated setups, an RS232 control option is also available. RS232 is used by a number of control-systems such as Crestron, Control4 and iRule.


12V wireless trigger is also included


 

 

Available with either DynaGrey or BrightWhite

The tension system allows us to use the same fabric on our tensioned screens that we use for our reference quality UltraFrame framed screens. By avoiding the use of fiber threads, common regularly motorized screens as well as a number of tensioned screens supplied by others, we are able to provide a seamless structural appearance that allows you to be seated very close without being bothered by visible structure from the fabric.

The Tab V6 is including either a brand new V6 version of the DynaGrey light grey fabric with a gain-factor of 0.8 or the new 6. generation BrightWhite matte white fabric with a gain of 0.95.

The DynaGrey is our recommended choice for most regular setups in living rooms where walls and ceiling is typically white / light colored and thus reflective. The grey nuance in the fabric reflect less from the surroundings than a regular white fabric and therefore delivers improved image dynamics. However, this is at a cost of gain (the amount of light reflected), about 20% less compared to the BrightWhite fabric. Still, since image dynamics and contrast is of such importance for the perceived quality of the image, our clear recommendation is to use the BrightWhite fabric only in highly light-reflective-controlled rooms with dark / non-reflective ceilings, floors and walls surrounding the screen.


The DynaGrey

We actually reduced the gain from our 5. generation DynaGrey by 0.1 in order to obtain an even matter surface. This ultramatte surface provides the best image quality we have been able to supply to date and is a clear upgrade from our previous generations of fabric. The matter we are able to get the surface, the less you are able to see the actual structure from it. The best projection screen is actually the one you don´t notice at all!

Our V6 fabric (to the right) has been made significantly matter, providing even less visible structural appearance and noticeable improved overall quality


This gain in combination with the general design of the fabric secures that no speckles (reflective artifact) appears or polarization-residue remains (which is important when using active 3D). Speckle is a very common issue for screen-material in both high and low price-classes, a phenomena that both reduces the actual resolution / detailing of white / bright segments as well as introduces a lot of general noise to the image. We´re dedicated to make certain such issues are not apparant with any of our screen-materals and would therefore never increase gain to levels that potentially introduces these issues.

 

Example of a (heavily) speckled (left) vs. a non-speckled (right) reflection

 

Furthermore, the fabric has an ultra fine structural coating, and with no use of fiber threads or other coarse elements the structure of the surface is not visible even at very close seating-distances.

The BrightWhite

The UltraFrame also includes the BrightWhite, matte white fabric with a gain-factor or 0.95. In addition to getting the surface matter than ever before on our BrighWhite as well, for the 6. generation, we´ve been able to get the color reflection down to an extremely impressive level of about 1-1,5% of that of the D65 reference; Stewart Studiotek 100. Although the grey material is also very color accurate, measured within 4% of the Stewart Studiotek 100, the V6 matte white fabric really is a cinema enthusiasts dreamscreen so to speak. If you do have the typical "batcave" cinema-room available, where floors, walls and ceiling close to the screen is dark and non-reflective in nature, this fabric is our clear reccommendation.
 

D65 tuned

D65 is the term for the white-point all Blu-ray-discs and other types of video-content is mastered at. In order to display the image identical to your source you need to make certain your equipment projects that same D65 white-point.

Although calibration is still required even when the screen-material is D65 neutral, the neutral reflection will require less calibration-corrections than screen-material that moves primary colors too much in one direction or the other. For example, if a screen reflects green 5% more than it´s supposed to, the calibrator would need to reduce the overall brightness of the entire image by a significant % in order to compensate for the error.

Our DynaGrey fabric measures within 4% of the Stewart Studitek 100 reference, while the BrightWhite measures within 1-1,5%. Both fabrics are considered highly D65 color neutral, and will take very little toll on the brightness produced by your projector when calibrated to D65.

 

Specs
 

 

  • Tab-tension mechanism in high quality for an even surface
  • Superfine structured fabric, no use of coarse fiber-threads as in most regular motorized or manual screens
  • 5 cm side masking and 30-60cm top black drop (can be adjusted flexibly, black drop varies by size, please see "B1" in chart below)
  • Possible to install both flush in ceiling, ceiling using hooks or wire and regular wall
  • Stylish cassette in either black or white painted aluminum
  • IR-remote, manual control box, 12-volt cordless trigger and RS232 control systems

 

Measures

 

Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.