Vennligst vent...

Produktet ble lagt i handlekurven.Se handlevognen her
Handlekurven din er tom.
Tom handlevogn
Forsiden > AV UTSTYR > VIDEOPROSESSORER > HDfury Linker 4K60 4:4:4 600MHz HDCP 2.2 -> 1.4 + SCALING

Vennligst vent...

Linker 4K60 4:4:4 600MHz HDCP 2.2 -> 1.4 + SCALING
Linker 4K60 4:4:4 600MHz HDCP 2.2 -> 1.4 + SCALING
Linker 4K60 4:4:4 600MHz HDCP 2.2 -> 1.4 + SCALING
Linker 4K60 4:4:4 600MHz HDCP 2.2 -> 1.4 + SCALING
SKU: Linker
På lager På lager I butikk På fjernlager 1-10 stk stk tilgængelig produkt(er) på lager til angitt spesialpris.
Antall:

2 499,-
 
Kundeerfaringer
Tottla 07.09.2016 19:29
Koblet denne opp mellom Panasonic UHD spilleren og min VW500 4K Prosjektor.....Funker helt fantastisk,
Beskrivelse

NYHET! Siste generasjons HDMI "doktor" fra HDfury løser alle dine HDCP- og oppløsningsutfordringer. Projektorer uten HDMI 2.0 / HDCP 2.2-inngang kan endelig vise 4K UHD Blu-rays uten problemer!

Forskjellen på "Linker" og "Integral" kan du lese her >>. Kort fortalt gir Integral-modellen deg én ekstra HDMI utgang og mulighet for matriseswitching (hvilken som helst kilde til hvilken som helst utgang i 2x2), mens Linker også støtter skalering av både oppløsning, chromasampling og fargedybde. Det er også mulig Linker vil få støtte for konvertering av REC2020 til Rec709 og vice versa, men dette er pending funksjonalitet. REC2020 er formatet som benyttes på 4K UHD-platene, et utvidet fargerom som følger "HDR"-formateringen men ikke alltid er ønsket da dette krever ekstra filtrering som trekker mye lysstyrke. Hvis Linkeren får støtte for konvertering av REC2020 til Rec709 vil dette kunne føre til støtte for HDR uten at fargerommet nødvendigvis vil måtte settes til REC2020.

Både Integral og Linker støtter 4K i full 18GBit båndbredde.

 

Informasjon fra produsent:

No more boundaries in HDMI | One device to link them all!

HDfury Linker is a 4K60 4:4:4 600MHz 18Gbps HDMI2.0a Level A capable scaler built for system integrators and advanced users that will please everyone else as well.
By supporting the max bandwidth and data transfer rate of the HDMI2.0a standard and by offering new scaling modes, options and possibilities to convert and always fed optimum signal through all existing HDMI and HDCP revision, Linker is set to cross all HDMI boundaries.

Linker is capable of connecting any HDMI/HDCP revision sources devices to any HDMI/HDCP revision sink devices @ their best capabilities. GUARANTEED!

Linker_gold_black_promo2

If you ever saw the following statement: “this TV does not support HDCP 2.2. Make sure you have HDCP 2.2 capable TV” or a similar HDCP error message, and even if you fixed such issue with Integral or others but run into limitations like signal unsupported, blackscreen, not getting the best signal to your display from all your sources or no AVR audio available when 4K signal is running or any others, make sure you never see any of them again with the HDfury Linker! Featuring 2 inputs and 1 output, HDfury Linker can act as Scaler, Switcher, Infoframe and HDR metadata Injector and Extractor with Sound, HDCP Doctor, HDMI Doctor, EDID management and more… Discover the tomorrow’s hardware today!

HDfury Linker Key Features

Ultra Scaling up to 4K60 4:4:4 600MHz

HDfury Linker offers impressive scaling modes to ensure that any HDMI/HDCP revision sink device get fed at its max capabilities ALWAYS and GUARANTEED.
Featuring Upscale, Downscale, Passthru and Bypass mode as well as Chroma Conversion and Color Depth modification on the fly at 8, 10, 12 and 16bit for FHD, UHD and DCI 4096x2160p.

Here is, among plenty others, some of the available scaling modes…

HDCP/HDMI2.x HDR/BT2020 sources input To High-End Advanced HDCP/HDMI 1.x Displays
4K24/25/30 RGB/YCC 4:4:4 12b 450MHz 1080p24/25/30 RGB/YCC 4:4:4 12b 111MHz
4K50/60 YCC 4:2:0 10b 371MHz 1080p50/60 RGB/YCC 4:4:4 10b 185MHz
4K24/25/30 RGB/YCC 4:4:4 12b 450MHz 4K24/25/30 YCC 4:2:0 12b 222MHz
HDCP/HDMI2.x HDR/BT2020 sources input To basic HDCP/HDMI 1.x Equipment like AV receiver
4K50/60 YCC 4:2:0 10b 371MHz 1080p50/60 RGB/YCC 4:4:4 8b 148MHz
4K24/25/30 YCC RGB/YCC 4:4:4 12b 450MHz 1080p24/25/30 RGB/YCC 4:4:4 8b 74.25MHz
4K50/60 RGB/YCC 4:4:4/4:2:2 8b 600MHz 1080p50/60 RGB/YCC 4:4:4 8b 148MHz
HDCP/HDM1.x Capable Sources input To Advanced HDCP/HDMI 2.x Capable Sink
4K24/25/30 RGB/YCC 4:4:4 8b 300MHz 4K24/25/30 RGB/YCC 4:4:4 16b 600MHz*
1080p24/25/30 RGB/YCC 4:4:4 16b 148MHz 4K24/25/30 RGB/YCC 4:4:4 16b 600MHz*

This is only a small excerpt, endless scaling possibilities are available, the Ultra Scaling modes list is now so big that we had to publish it separately: here
* Tested ok on LG OLED 2016

Dedicated HDCP Doctor

Providing a total of 4 HDCP 1.4 and 2.2 engines for decryption/encryption, HDfury Linker offers a workaround for HDCP issue including HDCP 2.2 > HDCP 1.4 and HDCP 1.4 > HDCP 2.2 both ways conversion within the same unit.
Each RX block decrypts the input first whether its 1.x or 2.x. Then output port can individually encrypts it to 1.4 or 2.2 or not encrypt it at all if it was not encrypted initially.
Unlike HDfury Integral that can convert any signals within the 600MHz bandwidth of HDMI2.0a, thus including 1080i, 3D signals, PC signals and all SD/HD/FHD/UHD standard formats, HDfury Linker only support HDCP conversion for SD/HD/FHD/UHD signals up to 600MHz.
1080i, 3D signals, PC signals (except a few manually added) cannot be HDCP converted with the HDfury Linker, they go through in Bypass mode (untouched/untouchable).

Display HDCP 2.2 Content with Non-HDCP2.2 Compliant Devices

HDCP 2.2 is the new copy-protection scheme for 4K UHD content.Not only it is not backward compatible but many recent 4K devices don’t even support it.
Source devices, including media servers and head-ends like Netflix, will encode their 4K content with this new scheme. TVs must be HDCP 2.2-enabled to play it, and everything in the video chain including switches and receivers must be compliant as well, or the display will go dark and/or display a HDCP error message.
Bad news for consumers who have purchased expensive, high-bandwidth, processor-rich switchers, receivers and displays to accommodate 4K. While the newer products may support the bandwidth needs of 4K, they won’t play copy-protected works until HDfury Linker is an active part of the setup.

2×1 Switcher up to 4K60 4:4:4 600MHz 18Gbps

Switching between 2 inputs up to 4K60 4:4:4 600MHz signal and scaling through all HDMI levels and revision is now a reality, thanx to USB or push button, you can easily switch between 2 inputs that will be scaled to one output. HDCP conversion can be configured and applied on the fly in order to always output the type of HDCP signal encryption that your display or sink device is expecting.

HDR and Infoframe Metadata Live Injector and Extractor with Sound

The HDfury Linker is capable of injecting and extracting live Infoframe and HDR metadata at any resolution and in real time while keeping HDMI sound.
A further software solution for a complete real time handling of infoframe and HDR metadata will be available for the Linker: here from our exclusive licensed partner AV TOP.

Advanced EDID Management

Advanced EDID Management available from the HDfury Linker with either:
A Selected EDID bank, a Custom uploaded EDID, a Sink mode EDID or a Fixed basic EDID.
Sniff EDID from connected sink devices, Save, Edit, Load any custom EDID table at anytime.
Select and pick any EDID of your choice from a list of 25 EDID tables, it loads and reset HPD to present your chosen one automatically.
Sink EDID mode feature will create a custom EDID by mixing sink EDID connected with some EDID flags such as: YCbCr/BT2020/HDR/3D*

Control and Update

USB GUI Utility via Windows PC and various physical buttons for configurations are available.
External Bluetooth dongle for iOS/Android control might be available in the future. (Not yet guaranteed, please revisit prior to launch)

Rec.709BT2020 via 3×3 Matrix and RGB Coeff

There is chance the 4K Linker will be able to convert 709<>BT2020, both ways, in the near future but it’s not yet a guaranteed feature. Work in progress.

* Not yet available.

 

HDfury Linker Key Specifications

Main Specifications

  • 2x Input / 1x Output Switcher (HDMI2.0a/HDMI1.4/DVI1.0 compatible)
  • ■ 4K60 4:4:4 600MHz 18Gbps Pass through
  • ■ 4K24/25/30/50/60 <> 1080p24/25/30/50/60 Upscale/Downscale with or without colordepth maintained and with or without chroma conversion.
  • ■ Video Bandwidth - 18 GBP/sec.
  • ■ Supports BT.2020.
  • ■ HDR10/Dolby Vision Support.
  • ■ 4K 10, 12, 16 Bit Support
  • ■ 16 Bit Per Pixel Deep Color Depth Available (48 Bit)
  • HDCP Doctor (HDCP Workaround solution to any HDCP error)
  • ■ HDCP 2.2 > HDCP 1.4 conversion
  • ■ HDCP 1.4 > HDCP 2.2 conversion
  • ■ HDCP x.x > HDCP x.x conversion
  • Dual HDMI2.0a & HDMI 1.4 combined
  • Dual HDCP 1.4 & HDCP 2.2 combined
  • Advanced EDID management via USB (IR or Bluetooth APP support might come as external accessory)
  • ■ Improved EDID Management solution with either a Selected EDID bank, Custom uploaded EDID, Self generated SINK EDID or a Fixed basic EDID.
  • ■ Sniff EDID from connected sink devices, Save, Edit, Load any custom EDID table at any time.
  • ■ Select and pick any EDID of your choice from a preloaded list of EDID tables, it loads and reset HPD to present your chosen one automatically.
  • ■ SINK EDID MODE feature can create a custom EDID by mixing sink EDID with forced flags such as: Stereo/5.1/Full/YCbCr/BT2020/HDR/3D.
  • HDR & AVI InfoFrame Live Injector and Extractor with Sound. Watch the video!
  • HDMI Booster/Extender: Capable of extending 1080p resolution up to 15m. in and 15m. out (30m. total for 1080p), UHD resolution up to 10m.
  • HDMI Doctor: Solves most HDMI integration issues such as HDCP, EDID, HPD, and audio breakout.
  • HDMI Equalevel: Precise signal equalization towards both input and output signals perfectly delivers the best possible picture quality.
  • Hot-Plug control: Force the input device to always see an active connection.
  • Licensing: Fully licensed and compatible with all HDMI and HDCP technologies.
  • Deep Color Support
  • xvYCC Color Support
  • Flexible/Portable/Plug’n Play
  • 3D Ready: Capability to pass 3D stereoscopic signal formats.
  • Just like any recent HDfury hardware, it comes with USB upgradable firmware that allow you to unleash furious features.

Supported Audio/Video Signals

  • Supported Format: SD/HD/FullHD/UHD/4K30/4K60, basically INPUT/OUTPUT any video format up to 4K60 4:4:4 600Mhz 18Gbps
  • Supported resolution examples: 480p/720p/1080i/1080p24/1080p25/1080p30/1080p50/1080p60/1440p50/1440p60/2160p24/2160p25/2160p30/2160p50/2160p60 and DCI
  • Support all UHD/BR standard resolution: 4K60 4:2:0 10bit BT2020 HDR, 4K60 4:2:0 12bit, 4K30 4:4:4 12bit, 4K30 4:4:4 16b ..
  • Support all VESA mode video format (PC Resolutions) up to ultra high resolution such as WQSXGA, QUXGA, QFHD, WQUXGA, 4K
  • Support any Audio format such as PCM at up to 192kHz, compressed audio (IEC61937), DSD, DST,DTS,DTS-HD, Dolby True HD, DTS-MA and HBR.

Technical Specifications

  • Audio: PCM at up to 192kHz, compressed audio (IEC61937), DSD, DST, DTS, DTS-HD, Dolby True HD, DTS-MA and HBR.
  • DDC Signal: 5V p-p (TTL)
  • Power Supply: External 5 Volt 2 Amp USB (same as most smartphone/tablet PSU)
  • Power Consumption: <2Watts
  • Current Absorption: around 400mA
  • Size : 65 * 49 * 39 (mm)
  • Product Dimensions: 3.6” x 2.5” x 1”, Weight: 4 oz
  • Shipping Dimensions: 6.3” x 4.2” x 3.3”, Weight: 16 oz
  • Enclosure: Black/Gold with Green Led
  • Regulation: CE, FCC, RoHS

 

Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.