Dayton UM12-22 12″ Ultimax Subwoofer driver 600W RMS

9 på lager

SKU: 295-512
Antall:
2 999,- inkl. mva

2 999,- inkl. mva

9 på lager

Varenummer: 295-512 Kategori: Stikkord: Brand: Dayton

Beskrivelse

NYHET! Superkraftig 12″ driver fra Dayton med FS nede i 26,2Hz, xmax på hele 19mm og 600W RMS.

Informasjon fra produsent:

Dayton Audio’s Ultimax Series DVC subwoofers are purpose-built to move tons of air and create clean, articulate, fast bass. Experience the apex of subwoofer design!

Dayton Audio’s Ultimax Series DVC subwoofers are purpose-built to move air and create clean, articulate, fast bass. Experience the apex of subwoofer design.

Highlights
  • Thick, one-piece Nomex honeycomb covered cone with woven heavy-duty glass-fiber
  • Tall-boy rubber surround for extra-long linear excursion without reducing cone surface area
  • 600 watts RMS power handling
  • Copper shorting rings and cap reduce distortion due to inductance variations
  • Dual 2 ohm, 2-layer copper voice coils
  • Large vented pole piece and under-spider venting
  • Black anodized aluminum former and black pole improves heat dissipation

Cabinet recommendations: 
• Sealed 2.0 cubic ft. (net internal) with 1 lbs. of Acousta-Stuf polyfill, f3 of 36 Hz with a 0.707 Qtc alignment
• Vented 4.0 cubic ft. (net internal, not including driver or port volume) tuned to 20 Hz with a 10″ wide by 1.5″ high slot port that is 25″ long, which yields an f3 of 19 Hz

Note: All parameters derived with voice coils wired in series.

 

Product Specifications
  • Nominal Diameter12″
  • Power Handling (RMS)600 Watts
  • Power Handling (max)1200 Watts
  • Impedance2+2 ohms
  • Frequency Response20 to 1,000 Hz
  • Sensitivity86.7 dB 2.83V/1m
  • Voice Coil Diameter2.5″
Thiele-Small Parameters
  • Resonant Frequency (Fs)26.2 Hz
  • DC Resistance (Re)3.2 ohms
  • Voice Coil Inductance (Le)1.25 mH
  • Mechanical Q (Qms)3.62
  • Electromagnetic Q (Qes)0.71
  • Total Q (Qts)0.59
  • Compliance Equivalent Volume (Vas)1.65 ft.³
  • Mechanical Compliance of Suspension (Cms)0.14 mm/N
  • BL Product (BL)14.2 Tm
  • Diaphragm Mass Inc. Airload (Mms)270g
  • Maximum Linear Excursion (Xmax)19 mm
  • Surface Area of Cone (Sd)490.9 cm²
Materials of Construction
  • Cone MaterialNomex / Glass Fiber
  • Surround MaterialRubber
  • Voice Coil Wire MaterialCopper
  • Voice Coil FormerAluminum
  • Basket / Frame MaterialCast Aluminum
  • Magnet MaterialFerrite
Mounting Information
  • Overall Outside Diameter12.38″
  • Baffle Cutout Diameter11.22″
  • Depth6.22″
  • Bolt Circle Diameter11.69″
  • # Mounting Holes8
Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity suggestion)
  • Sealed Volume2.8 ft.³
  • Sealed F334 Hz
  • Vented Volume5.58 ft.³
  • Vented F317 Hz
Dayton Audio UM12-22 12″ Ultimax DVC Subwoofer 2 ohms Per Coil
  • BrandDayton Audio
  • ModelUM12-22
  • Part Number295-512
  • UPC844632099250
  • Product CategorySubwoofer Drivers
  • Unit of MeasureEA
  • Product Rating
    (33 Reviews)

  • Weight24.95 lbs.

 

Tilleggsinformasjon

Vekt 10 kg
Dimensjoner 50 × 30 × 20 cm

Omtaler

Det er ingen omtaler ennå.

Bli den første til å omtale “Dayton UM12-22 12″ Ultimax Subwoofer driver 600W RMS”

Din e-postadresse vil ikke bli publisert. Obligatoriske felt er merket med *