Ascendo Immersive Audio The6 PRO Passive Ceiling

SKU: TheSixPassiveCeiling
Mangler du plass men ønsker allikevel lyd av topp kvalitet? See no further, med kun 4,3cm byggedybde passer disse inn en enhver vegg eller himling. Lyden er som på The6-serien ellers krystallklar og spredningen svært god som følge av koaksial oppbygning (diskantdriveren er plassert i midten av bass-elementet), og dermed kan du sikre deg topp lydkvalitet som ikke synes!
6 999,- inkl. mva
Antall:

Bestillingsvare
12 er forventet inn 15-07-2024

6
50 × 30 × 15 cm

Send meg en epost når denne er på lager

Beskrivelse

Bruksanvisning >>

 


 

THE6 PRO PASSIVE CEILING

ASCENDO’s new THE6 PRO PASSIVE CEILING time coherent coax point-source complements the famous on-wall speaker lines for living room home theaters and high-quality multiroom music systems. The highest audio quality is offered for this speaker category because of the much-increased high-frequency off-axis response. It is a shallow in-ceiling speaker fitting in challenging positions where depth is a concern, most others cannot offer a solution.

The new coax with Neodymium motor, 1,1” softdome tweeter and mid-woofer made of highly damped sandwich carbon fibre with foam core and rubber surround is capable of handling high power and reproduces rich transparent dynamic sound. THE6 PRO PASSIVE CEILING also impresses with its silky high-frequency reproduction and perfect symmetrical dispersion.

Omtaler

Det er ingen omtaler ennå.

Bare innloggede kunder som har kjøpt dette produktet kan legge igjen en omtale.

SPESIFIKASJONER

SPECIFICATIONS

Speaker type Time coherent 6,5″ point-source coaxial
Passive | Active Passive
Use case In ceiling
SPL Measurement  Data
109 db peak
Frequency Range Measurement  Data
75 Hz – 20 kHz / -3dB
 Efficiency 87 dB  / 1W/m
Power handling 200 W
Impedance 4 Ω
Motor Woofer and tweeter: Neodymium
Woofer 6,5″ carbon
Tweeter 1,1″ Soft dome
Dispersion pattern in degrees 120°
Input Terminal Push on terminals up to AWG14 (2,5mm)
Diameter 8,86″ / 225 mm
Cut out diamter 8,07″ / 205 mm
Mounting depth 1,69″ / 42,9 mm
Grille 1 diamter 8,94″ / 227 mm
Grille 2 (width  x height) (8,94 x 8,94)” / (227 x 227) mm
Weight 2,2 lbs | 1 kg
Grille mounting Magnetic
Grilles finish White, can be overpainted
Mounting Dogfeet clamps

Technical modifications subject to change without further notice