Alcons LFE18 18″ Slim Subwoofer (passiv, ikke portet)

Bestillingsvare

SKU: LFE18_SLIM
Antall:
34 999,- inkl. mva
Varenummer: LFE18_SLIM Kategori: Brand: Alcons

Beskrivelse

NYHET! Alcons fortsetter satsningen innen hi-end hjemmekino, screening og studio og lanserer nå en lukket 18″ subløsning som har in-room respons sub 10Hz! Dette klarer de ved bruk av en helt ny, spesialdesignet driver med over 30mm xmax, dual 2Ohms coiler og generelt ekstrem byggekvalitet. I kombinasjon med Alcons proprietære kontrollsystem (SIS) oppnår du en dempningsfaktor på >10.000 og dermed en ekstrem kontroll på driveren til tross for at selve effekttrinnet plasseres et annet sted (ofte på teknisk rom).

Leveres enten i standard dimensjoner (0,8×0,733×0,45m), eller i en baffelvegg tilpasset, slim utgave (måler 1,2x1x0,27m).


“Slim” utgaven har en høyde på 1,2m, bredde på 1m og dybde på 0,27m og egner seg derfor godt for installasjon i en baffelvegg.

Standardutgaven bygger 0,8×0,733×0,45m og egner seg godt til litt dypere baffelvegger er frittstående installasjoner.

Informasjon fra produsent:

  • Reference-quality LFE subwoofer system
  • Extended in-room frequency response down to below 10 Hz
  • Superb impulse response for most realistic sound experience
  • Single 18” extreme-excursion woofer with dual 3” voice-coils
  • SIS™ pre-wired for very high system damping factor (10.000)
  • Available in space-economic design, with 27,5cm/10.8” depth

Product description

The CRMS-LFE18 is a large-format reference subwoofer system for very demanding listening applications, delivering a super accurate bass and sub response for a maximum quality audible and sensible performance.

Specific attention has been paid to obtain a linear response in the operating bandwidth, while handling ultra-low frequency transients with maximum control.

The 18” custom-designed woofer features a large motor structure with dual 3” voice-coils offering an extreme excursion of 30 mm / 1.2-in. resulting in a 10 dB more excursion capability than a traditional (pro) 18” woofer. (not included in SPLpeak spec).

The direct-radiating transducer mounted in the internally-stiffened, sealed cabinet enables an in-room response below 10 Hz; The superb impulse response is a perfect match with the ultra-fast transient response of the Alcons pro-ribbon systems. The 4 ohms impedance caters for maximum amplifier efficiency.

For full system performance, the CRMS-LFE18 is to be driven and controlled by the ALC amplified loudspeaker controller; Driven by the ALC, the CRMS-LFE18 delivers maximum sound quality and output power with long-term operation reliability.

The integrated factory presets in the drive processor of the ALC offer optimisation settings, as well as VHIR™ processing for perfect phase-matching with an Alcons pro-ribbon system.

The Signal Integrity Sensing™ pre-wiring ensures complete cable/connector compensation between the CRMS-LFE18 and ALC, significantly increasing response accuracy and reducing both linear and non-linear distortion to an absolute minimum, regardless of cable length and system impedance.

The combination of CRMS-LFE18 and ALC delivers the most accurate reproduction for even the lowest octaves, to bring the most realistic experience of speech, music and effects, as it was intended.

The CRMS-LFE18 is also available in a slim enclosure (“CRMS-LFE18sl”), for maximizing space-efficiency with the Alcons slim-sized main systems.

Typical applications include LFE system for quality-conscious post-production facilities and mastering suites, high-end mix/screening rooms, recording studios and premium home theatres.

Downloads

 

Omtaler

Det er ingen omtaler ennå.

Bli den første til å omtale “Alcons LFE18 18″ Slim Subwoofer (passiv, ikke portet)”

Din e-postadresse vil ikke bli publisert. Obligatoriske felt er merket med *